#Environment #Ideas

The Hidden Meanings of Maps – The Projection Choice

By showing the territories from above, the cartographer takes an artificial “objective” point of view. He  stops being just a “regular inhabitant” who lives in the world to become an observer, as well as a reporter.

JUST LIKE THE PHOTOGRAPHER OR THE PAINTER, THE MAP MAKER TURNS INTO A MESSENGER BRINGING BACK DATA “FROM ABOVE” TO THE PEOPLE “ON THE GROUND”. IT IS NOT MEANINGLESS, AND IT IS CERTAINLY NEVER PURELY OBJECTIVE.

First maps were used more to conquest lands and assess resources than for anything else. There is something very powerful about being the one to draw others lands, to trace borders, to delimit people’s possessions. The one looking from above has more visibility. He gets the “big picture” of things. When human beings began to map their world, they started to act like “planet managers” and not just as passive creatures.

Humanity shifted then from the scale of immediacy (what you see everyday around you) to the regional & global scale of media  (what you can now conceive above your every day world, thanks to media relating others knowledge, meaning you can access to things and places you haven’t experienced yourself).

Still today, even at the age of Google Earth and ubiquitous GPS, maps are still heavily connoted.  Even if we are usually aware of the importance of keeping a critical mind when reading and looking at visual representations, it is hard to always perceive all the details that will influence our final opinion at the end of an article. There are however a few tricks to know to help keeping that distance when reading a map.

This set of posts called “The Hidden Meanings of Maps” will review them one by one, as follows :

THE PROJECTION CHOICE TELLS MORE THAN YOU THINK

Map projection is basically the canvas. It is the grid shape beneath the map, the angle the cartographer choose to illustrate his point & topic. Projections can modify the way countries and continents will look,  draw attention on a specific phenomena, and its potential causes according to the cartographer.

Projection can put the emphasizing either on the distance between two places, the feeling of centrality or remoteness, the impression of high concentration or very low density…

NEVER FORGET THAT LOOKING AT A MAP IS LOOKING AT AN EARTH DEFORMATION. THE TYPE AND ASPECT OF THE DEFORMATION TELLS A LOT ABOUT THE EDITORIAL ANGLE THE CARTOGRAPHER CHOOSE TO ADOPT.

Example 1

circum-splice

Source: Panama-Pacific Universal Exposition Archives

Let’s take for instance the Cahill’s butterfly projection that is perfect to illustrate circumnavigation. The projection was initially used in 1915 for the Panama Pacific International Exposition held in San Francisco to illustrate a flight trip around the world. It won a gold medal in the cartography category. Indeed, it was probably the most clever projection choice for this topic, as we visualize easily the circle drawn by the pilot route around the globe, while keeping San Francisco at the heart of the story.

hiddenmeanings1

Source: Port of San Francisco

The projection was such a good way to emphasis San Francisco strategic position in the world that the Port of the city choose to use it a few years later as an advertising poster. On this version of the map, marine routes are the main topic to illustrate: it seems obvious that the port San Francisco is a central shipping hub in the world, from where you get the feeling to be able to reach out to any major city in the world.

Alt_Round about the Earth1

Source: Round About the Earth Book

The other way of showing circumnavigation is with on a more standard projection, like the Mercator one, here used to represent the ‘World map of route taken by Ferdinand Magellan (1480-1521) when he led first circumnavigation of the globe 1519-1521 (from the Round About the Earth book).  Route can appear a lot longer on that kind of map than with a butterfly projection, and the feeling of “circum” (round trip) is less tangible.

Example 2

The more recent cartogram technique (below) makes grid size vary according to data. It is not a projection per se, but a fantastic way to embed the theme of your map in the very outlines of territories. On this example taken from Benjamin Hennig’s blog, size of countries vary according to their crop lands surface percentage. On this map, USA & India appear even bigger than they really are, illustrating how “above the average” they relatively are versus other countries of the world. On the other hand, it looks like Scandinavia or Peru barely exist, meaning their percentage of cropland is way “below the average”.

On that kind on map, average would be represented by countries looking like they haven’t been deformed (look at New Zealand for instance on this one).

hiddenmeanings2

Source: Benjamin Hennig’s blog

The map below, from University of Wisconsin (data from 1992), has the exact same topic, but the cartographer choose a different projection and a different data visualization technique.  Looking at the second map, it is easy to spot darker areas that matches biggest deformations on the first map. Is there one projection better than the other here? The first one is probably better to highlight top 5 on both sides of the distribution, as the second one is likely to be more detailed and to allow a more precise view of spatial distribution of cropland.

We could say the second projection is more “neutral” than the first one.

diagram-croplands-highres

Source: University of Wisconsin, Esri & Nasa

Example 3

Here are two maps of oil resource in the world. The first one is using a Mercator projection, slightly sloping. Colors do not match anything but continents, and the size of rectangles indicated numbers of barrels produced in 2005. We kind of see that Saudi Arabia, Irak, Kuwait and Iran lead the market here, but more specific comparisons are made difficult. Plus, “other countries” are just put together as one category that is not clearly defined (I am assuming, all countries with less than 40 billion barrels produced this year).

World_Oil_Production12

Source: Terra Firma

The second map is using a similar projection as the cartogram one, which makes the size of countries proportional to their oil annual production. On this one it takes 2 seconds to see who the main producers are, and give a good sense of proportions. The second one seems to have a much more powerful impact than the first one, doesn’t it?

who-has-the-oil

Source : BP Statistical Review Year-End 2004

 

More examples…

What do you think of the following projection choices according to the topic of the map?

  • How the Media See the World – the New York Time World Coverage Mapped (From Content Analysis Blog – Source: Observatoire des Medias): Link to the map – does the cartogram technique seems the right choice to you for the topic illustrated here?
  •  Ocean topography of the World – Link to the map – used here to explain seismic activity. What does the framing and projection tells you?
Say thanks for this article (1)
The community is supported by:
Become a sponsor
#Environment
#Contributing Writers #Environment #Ideas #Satellites #Science
Using SWOT Mission Data: Monitoring South Asian Rivers During Monsoon Season
Sebastian Walczak & Nikita Marwaha Kraetzig 10.19.2024
AWESOME 0
#Environment #Fun #Satellites #Science
Simple Raster Analysis: Detection of Landslide Zones
Sebastian Walczak 08.20.2024
AWESOME 1
#Environment #Featured #Humanitarian
Urban Damage Assessment Using SAR Data: The Case of Aleppo
Hassan Safieddine 02.14.2024
AWESOME 5
Next article
#People

Is it worth being a member of your local professional association?

Professional organisations and business groups are common place in all industry sectors and the GeoSpatial Industry is no exception.

These groups and organisations, in the main, are member funded organisations. That is, they exist mainly through the income generated through membership fees. So, it is worth becoming a member or maintaining your existing membership.

In my opinion, the answer is definitely YES, as it gives you the vital link between you and your industry, outside of your work / educational environment. But don’t think that just being a member will bring you benefits. Like any network, you need to work it, be involved and be always looking to connect with industry professionals that can make a difference.

WHAT ARE THE BEST ORGANISATIONS TO BE INVOLVED WITH?

Well that really depends on what you want to get out of them. If you are studying then you might look at professional organisations that can help you network with potential employers. If you are already an industry professional you might look to get involved with a group more aligned to the industry you are working in or the technology that you use.

Let’s examine the right organisation for you and your stage of your career.

1. STUDYING OR RECENT GRADUATE

If you are still studying or have just graduated and looking for that first career opportunity, then look at an industry organisation that will give you value for money plus plenty of broad networking and professional development opportunities. Many professional organisations have discounted or free membership for students.

2. YOUNG PROFESSIONAL

As you career starts to develop, look for industry organisations that can help you maintain your broad industry development (CPD – Continual Professional Development) through courses, conferences and networking opportunities. You should also start to narrow your focus on specific industry or technical user groups where you can network with professionals in the same industry i.e. water, environment, surveying, etc or using the same software / technology.  For example Esri around the globe have local user groups and national and international conferences.

3. CAREER CHANGE

If you are looking for career change, then look for industry groups where you can network on a regular basis with industry leaders. This can be similar to the ‘Young Professional’ category but with a greater focus on where you want to take your career. It may be an opportunity to join new groups in other focus areas that you might be interested in moving into.

4. BUSINESS BUILDING

Are you trying to build your own business or are in a business development role for the company you work for? If so look for business groups that can help you find projects or are open to collaboration and helping their members find business. These sorts of groups tend to be a little more expensive to me members of but will definitely help you to streamline the business development process.

INDUSTRY GROUPS

Here is a short list of organisations that you may wish to investigate further.

  • Surveying and Spatial Sciences Institute (Australia)
  • Spatial Industry Business Association (Australia)
  • Mapping Sciences Institute Australia(Australia)
  • Remote Sensing and Photogrammetry Association (Australia)
  • Coalition of Geospatial Industries (USA)
  • International Society for Photogrammetry and Remote Sensing (Global)
  • URISA (Global)
  • American Association of Geographers (USA)
  • American Congress on Surveying and Mapping (USA)
  • Association for Geographic Information (UK)
  • CaGIS (USA)
  • California Geographic Information Association (USA)
  • Canadian Institute of Geomatics (Canada)
  • EUROGI (Europe)
  • Geospatial Information and Technology Association (Global)
  • Irish Organisation for Geographic Information (Ireland)
  • Plus many more

GET INVOLVED

Get involved. You will only get benefit from any of these types of organisations if you get involved. Attend meetings, functions, events and conferences. Join the committee, volunteer at industry events and network with your peers that you can help and that can be of assistance to you and your career.  Be a go-giver not just a go-getter J

Don’t wait for the opportunities to come to you – go to the opportunities.

Source: GeoSpatial Connect

Read on
Search